2013 RULES & FORMS (click on the division or form)
****Sportsman Modifieds
*Super Stocks
***Mini Stocks
**Thunder Stocks Lightning Stocks
Young Gun Youth Division (with
Registration Form)
***MINI STOCK AMENDMENTS (updated AS OF 5/15/13): UNDER CHASSIS AND
SUSPENSION - RULE # 6:
Trailing
arms
-
Rear Control arms may be fabricated from radius rods and heim
ends BUT MUST FOLLOW OEM STOCK SPECS,
MEASUREMENTS AND DIMENSIONS. WHEELBASE MUST REMAIN OEM STOCK. Rear end must be in stock location and square in the car (no
leading one side or “dog tracking”). RULE #8:
Sway
bars
-May have adjustable links. UNDER ENGINE AND DRIVETRAIN - RULE
#20: Ignition
(including
coils)
- After-market
electronics
may be used.
PLEASE NOTE: ANY MINI STOCK THAT CAME
EQUIPPED WITH A STOCK OEM TRACK BAR MAY NOT ALTER, CHANGE OR ADJUST
THE TRACK BAR AND MUST REMAIN IN STOCK OEM LOCATION.
****SPORTSMAN MODIFIED AMENDMENT 9AS OF 5/1/13): UNDER WEIGHT - RULE
# 2: Competing
with
a Stafford
Motor
Speedway
GM
Crate
Engine
P/N
88958602
(Factory
Stock)
with a bore maximum .020
over
and the legal 2brl
carburetor the minimum weight is
2525lbs
with
driver,
56%
maximum
left
side or
with a bore maximum .020
over
and the legal 4brl
carburetor the minimum weight is
2625lbs
with
driver,
56%
maximum
left
side.
*MINI STOCKS AND SUPER STOCK TIRE UPDATE: COMPETITORS MAY PLACE
THEIR DESIGNATED TIRE FOR THE DIVISION (MINI 23" OR 23.5" AND SUPER
27" OR 27.5") ANYWHERE THEY WOULD LIKE FOR SETUP. ANY
QUESTIONS REGARDING THIS RULES, CALL THE SPEEDWAY'S OFFICE.
*Former Twin State
super stock competitors are invited to compete at Monadnock Speedway under the
2012 Twin State Super Stock Rules. If there are any competitive
advantages, weight will be added and percentages changed to ensure equal competition.
Former Twin State Super Stocks competing at Monadnock Speedway in
2013 must comply with the Monadnock Speedway weight & % rules
(additional weight may be added), the spoiler rule, the 5” ride
height (frame clearance) rule and treadwidth rule. Any new tires purchased must comply
with the track tire rule. If you have any questions, please email us
at
monadnockspeedway@ymail.com and a tech official will get back to
you.
*Super stock
update - there was a misprint in the weight rule regarding the
updated % rule. Please go to the rules for the correction.
**STRICTLY STOCKS (BUILT TO THE MONADNOCK SPEEDWAY
RULES PRE-2008 AND THAT ARE ALREADY BUILT CARS THAT HAVE COMPETED IN
PAST SEASONS) ARE ELIGIBLE TO COMPETE IN THE THUNDER STOCK DIVISION
. CLICK HERE ON THE 2007 RULES FOR AN ARCHIVE COPY TO SEE IF
YOU ARE ELIGIBLE. PLEASE NOTE IF YOU ARE ELIGIBLE AND THE CAR
HAS COMPETED AS A STRICLTY STOCK THE WEIGHT AND PERCENTAGE YOU MUST
COMPETE UNDER IS OUTLINED IN THE THUNDER STOCK RULES. IF ANY
QUESTIONS ABOUT ELIGIBILITY, PLEASE EMAIL YOUR QUESTION TO THE
SPEEDWAY'S OFFICE. 2007 STRICTLY STOCK RULES
***Attention
Mini Stock Competitors...This past
weekend (3/2/13) management met with representatives from Hoosier
Tires regarding the the new track tire for the 2013 season and the
size of the wheels. In the discussion, the representatives
strongly encouraged that the tires be mounted on 7" wheels rather
than the 8" wheels to keep the integrity of the tire from caving in
which will result in tire issues during the season. After the
discussion, the speedway management and tech team met and made the
decision to keep all wheels 7" (no 8" wheels allowed) and offer competitors the choice to
use 23.5/7.0-13 RIB 800 Series on the right sides only for stagger
if needed. The left side tires will be the 23.0/7.0-13 RIB 800
Series. We apologize for the confusion however, we want to
make sure the competitors have the ability to maintain the integrity
of the tires without having tire issues that would result in
competitors spending more money to replace tires. If you
have emailed us with an initial order, please email us back to let
us know how many you need by sizes listed above.
COMPETITORS MAY USE YOUR 2012 USED AMERICAN RACERS UNTIL JUNE
22, 2013 EVENT WITH THE 7" WHEELS AND THE ONE 8" WHEEL FOR STAGGER.
UPDATE (3/11/13): COMPETITORS MAY USE A 7"
STEEL BEADED WHEEL MINIMUM WEIGHT 13LBS. FRONT WHEEL CARS USING A 7"
STEEL BEADED WHEEL MUST HAVE THE FRONT RIGHT SIDE WHEEL REINFORCED.
TO PURCHASE A MY LAPS TRANSPONDER (A.K.A. AMB)-
CLICK ON PICTURE BELOW.
all
transponder will need to be ordered through MYLAPS.COM - THE
SPEEDWAY WILL NOT HAVE ANY IN STOCK!
PLEASE EMAIL ANY QUESTIONS YOU MAY HAVE REGARDING
THE RULES WITH YOUR CONTACT INFORMATION AND A TECH OFFICIAL WILL
CONTACT YOU.
2013 FORMS & INFORMATION
List of Reserved Car 2013
Numbers (All Divisions)
2013
Registration Form (For All NASCAR Divisions)
Competition Race
Rules (Sportsman Modifieds, Super Stock & Mini Stocks)
Engine Sealing: Competitor who are interested in having their
engine sealed prior to the race season can call Red Landry at
413-593-6142. If you want the engine sealed, the engine must
not be assembled. The Speedway officials reserve the right to tear
down any engine, even if it sealed.
Approved Engine Builders:
RPM Racing Engines (Georgia
Center, VT 802-524-7406), R.A.D Auto Machine (Ludlow, Ma 413-583-4414), Horse Power
Engineering (Ellington, CT 860-871-2020), Ballas Automotive Machine
Shop (Keene, NH 603-352-9122) and Dutcher (Greenfield, Ma
413-773-3973)
If you would like the rules mailed, please call
the speedway's office.
|
